Printing Problems

Fix Canon Printer Printing Only Part of the Page

Steve KSteve K Nov 4, 2026 870 views

Question details

The user needs to troubleshoot a Canon printer that fails to print full pages in single-sided mode, despite printing perfectly when duplex mode is enabled.

How to Fix a Canon Printer Printing Only Part of the Page
Product
Canon MF644Cdw Printer
Device & OS
Windows 10
Scenario
Printing standard single-sided documents from a computer over an Ethernet network connection.
Observed behavior
The printer outputs only a partial page during single-sided print jobs. However, if the print job is switched to two-sided (duplex) printing, the pages print entirely without issue.
Before you start

Ensure your printer is powered on, securely connected to your Ethernet network, and that the display panel is free of any immediate error codes or paper jam warnings.

Solution 1Recommended

Inspect and Reload the Paper Tray

A misaligned, depleted, or damp stack of paper can cause the printer's feed rollers to slip, resulting in partial prints on the first page.

Because duplex printing uses a different mechanical path and timing for flipping the page, a minor paper-feed issue might only visibly affect single-sided print jobs. Refilling and correctly aligning the paper often resets the feed mechanism and resolves the partial printing error.

1
Remove the paper stack

Pull out the main paper tray of your Canon printer completely. Remove the current stack of paper and inspect it for dampness, folded corners, or damage.

2
Fan and reload the paper

Fan the stack of paper to ensure no sheets are sticking together. Place a fresh, properly aligned stack of paper back into the tray.

3
Adjust the paper guides

Slide the plastic paper guides so they rest snugly against the edges of the paper stack without bending the sheets.

4
Perform a test print

Reinsert the tray, wait for the printer to process the new paper status, and send a single-sided test print from your computer.

Inspect and Reload the Paper Tray
Hardware Reset: Running the printer completely out of paper and then refilling it can sometimes trigger a mechanical reset of the feed sensors, instantly resolving mysterious feed issues.
Free Microsoft Office alternative

Experience Flawless Printing with WPS Office

If recent software updates are causing document formatting or printing errors, try switching to WPS Office. It is a lightweight, reliable alternative that offers a robust printing interface and seamless compatibility with all standard document formats.

  1. 1. Download and Install: Visit the official WPS website to download and install the free WPS Office suite.
  2. 2. Open Your Document: Launch WPS Writer, Spreadsheet, or Presentation and open the document you wish to print.
  3. 3. Print Seamlessly: Press Ctrl+P to open the print dialog, select your Canon printer, verify the preview, and click Print.
High compatibility with Microsoft Word, Excel, and PowerPoint formatsIntuitive print preview and advanced page layout controls to prevent cut-off pagesFree, lightweight, and fast installation on Windows, Mac, and Linux OSSeamless document migration with a familiar, easy-to-use interface
microsoft office alternative - wps office

Frequently Asked Questions

Why does my Canon printer print perfectly in duplex but cut off single-sided pages?

Duplex printing uses a separate timing mechanism and paper path to flip the page. A slight loss of traction or a misfeed on the initial pickup might disrupt a single-sided print, whereas the duplex process mechanically bypasses or corrects this slight delay during the flipping phase.

Can leaving paper in the tray for a long time cause printing issues?

Yes. Paper left in a tray for extended periods can absorb humidity from the air, causing the sheets to swell, curl, or stick together. This often results in the printer's rollers failing to pull the first page evenly.

How do I know if a Windows update broke my printer driver?

If your printer was working fine and suddenly started printing partial pages immediately after a system update, a driver conflict is the most likely cause. Testing the printer from a different computer or a mobile device can help confirm if the issue is isolated to one PC's software.