Fix Index Cards Printing Off-Center in Microsoft Word
Question details
User needs to fix index cards that print off-center in Microsoft Word by verifying the custom 6 x 4 inch layout, margins, landscape orientation, and printer paper handling.
- Product
- Microsoft Word and WPS Office Writer
- Device & OS
- not provided
- Scenario
- The user is printing 6 x 4 inch index cards from a custom landscape layout that previously printed correctly.
- Observed behavior
- Index cards print off-center even though the document layout appears correct.
Load the index cards in the printer tray, confirm the paper size is set to a custom 6 x 4 inch format, and note whether the printer uses a manual or rear feed slot.
Verify the custom index card page setup and printer paper settings
Use this first when the document layout looks correct but the cards still shift, so you can rule out page size, margin, or orientation errors.
Open the document, click Layout > Size > More Paper Sizes, and set Width to 6 inches and Height to 4 inches for the custom index card.
In the Page Setup dialog, select Landscape, set all margins to 0.5 inches or your card printable margin, and click OK.
Click File > Print, choose Printer Properties, set the paper size to Custom 6 x 4 in or the matching index card size, and select the correct tray or manual feed.
Print a single card, measure the border with a ruler, and adjust the margins or paper guides if the content is still shifted.
Test the printer independently and recalibrate paper handling
Use this when the page setup is correct but the index card is still off-center, because printer alignment or paper pickup can cause the shift.
Set Up Index Card Printing in WPS Writer to Avoid Off-Center Output
Create a custom 6 x 4 inch landscape index card in WPS Writer, match the printer paper settings, and print a test card directly from a free Word-compatible alternative.
- 1. Open the index card document in WPS Writer: Download WPS Office, open the .docx file in WPS Writer, and click the Layout tab to access page setup.
- 2. Set a custom 6 x 4 landscape page: Click Size > More Page Sizes, enter 6 inches for width and 4 inches for height, select Landscape, and set your desired margins.
- 3. Match the printer paper and tray: Click File > Print, open Printer Properties, choose the custom 6 x 4 in paper size, and select the manual or rear tray that holds the cards.
- 4. Print a test card and adjust: Print one copy, check the alignment with a ruler, and tweak the page margins or paper guides if the card is off-center.

Frequently Asked Questions
Why are my index cards printing off-center even though the Word layout is correct?
This usually points to printer paper handling or alignment. Check that the paper guides are snug, the printer uses a custom 6 x 4 inch paper size, and the correct manual or rear tray is selected.
How do I create a 6 x 4 inch index card page size in WPS Writer?
In WPS Writer, open the Layout tab, click Size > More Page Sizes, enter 6 inches for width and 4 inches for height, select Landscape, and set your margins.
Can I print index cards from a manual feed tray?
Yes. Load one card at a time in the manual feed tray, set the tray in Printer Properties, and make sure the paper guides touch the card edges without bending them.
Does WPS Office preserve Microsoft Word index card layouts?
Yes. WPS Writer opens .docx files and retains page size, margins, and orientation, so you can use the same 6 x 4 inch index card layout for printing.
What should I do if the printer itself is off-center?
Run the printer alignment or calibration utility from the maintenance menu or Printer Properties, clean the pickup rollers, and print a test page without Word to confirm the printer output.




