Fix a PowerPoint Video That Freezes When Looping on a TV
Question details
Find a reliable way to play a PowerPoint presentation continuously on a TV when the exported video freezes between loops.
- Product
- Microsoft PowerPoint and TV media player
- Device & OS
- not provided
- Scenario
- A PowerPoint presentation has been exported as an MPEG-4 video for continuous playback on a TV.
- Observed behavior
- The TV is set to replay the video, but playback freezes instead of restarting reliably.
Keep the original PowerPoint presentation available if you plan to run it from a computer. Check the TV or media player's documentation for its repeat setting and supported video formats.
Run the PowerPoint presentation in kiosk mode from a computer
Use this method when the TV's built-in video player does not restart the exported MP4 reliably.
An exported MP4 does not retain PowerPoint's kiosk or loop settings. Running the original presentation lets PowerPoint control the slideshow instead of relying on the TV to restart the video.
Connect the computer to the TV with an HDMI cable, then select the corresponding HDMI input on the TV.
Open the original presentation in PowerPoint. On the Transitions tab, set an After time for each slide and apply it to the appropriate slides so they advance without a click.
Select Slide Show > Set Up Slide Show, choose Browsed at a kiosk (full screen), and select Using timings, if present under Advance slides. Click OK.
Select Slide Show > From Beginning and watch the presentation through at least one full restart. Press Esc to stop the show and adjust timings if needed.
Check the TV or media player's video loop settings
Try this if you prefer to play the exported MP4 directly without a computer.
Loop the original presentation with WPS Presentation
Open the presentation in WPS Presentation and run it from a computer connected to your TV, so the slideshow controls playback instead of the TV's MP4 player.
- 1. Open the presentation: Launch WPS Presentation and use Open to select the original PPT or PPTX file.
- 2. Connect the TV: Connect the computer to the TV with HDMI and select the TV's corresponding HDMI input.
- 3. Configure the slideshow: On the Slide Show tab, open Set Up Show and enable Loop continuously until Esc. Set slide timings so the presentation can advance automatically.
- 4. Start and verify the loop: Select Slide Show > From Beginning and watch through a complete loop. Press Esc to stop and adjust the timings if necessary.

Frequently Asked Questions
Does an exported PowerPoint MP4 keep the slideshow's loop setting?
No. After export, the MP4 is a video file, and continuous playback is controlled by the TV or media player rather than PowerPoint's slideshow settings.
Why does the video freeze even though repeat is enabled on my TV?
The TV's media player may not reliably restart the file. Check its firmware and supported video formats, or test the MP4 on a different media player.
How do I make a PowerPoint slideshow advance without clicking?
In PowerPoint, use the Transitions tab to set an After time for each slide. Then open Slide Show > Set Up Slide Show and select Using timings, if present.
Can I stop a PowerPoint kiosk slideshow once it starts?
Yes. Press Esc on the connected computer's keyboard to exit the slideshow.




