PDF Printing Issues

Fix Acrobat Reader PDF Printing at Letter Size on an HP Plotter

Amos GikundaAmos Gikunda Nov 19, 2026 868 views

Question details

The user needs Acrobat Reader to print a PDF on an HP plotter using the selected custom paper size.

Fix Acrobat Reader PDF Printing at Letter Size on an HP Plotter
Product
Adobe Acrobat Reader DC and HP plotter
Device & OS
not provided
Scenario
Printing a PDF at a custom paper size on an HP plotter.
Observed behavior
The PDF previews correctly, but the plotter receives an 8.5 × 11 inch paper size. Printing to other printers works correctly.
Before you start

Check the intended PDF page dimensions and the paper loaded in the plotter. Make sure you know the plotter model and have access to its printer properties and custom paper-size settings.

Solution 1Recommended

Match Acrobat Reader and HP plotter paper settings

Use this approach when the plotter receives Letter size instead of the selected custom size.

1
Select the plotter

Open the PDF in Acrobat Reader and choose File > Print. Select the intended HP plotter from the Printer list.

2
Check the driver paper size

Open Properties or Printer Properties in the Print dialog. Select the custom paper size, or create it in the driver's paper-size settings if available, and confirm the orientation.

3
Adjust paper source selection

In Acrobat's Print dialog, check the page sizing and preview. Try disabling Choose paper source by PDF page size when selecting the custom size manually; alternatively, enable it if the PDF page dimensions match a supported size in the driver.

4
Run a test print

Confirm the settings and click Print. Check whether the plotter receives the intended paper size rather than 8.5 × 11 inches.

Match Acrobat Reader and HP plotter paper settings
Driver options can vary: Custom paper-size names and controls depend on the HP plotter model and driver. The custom size must be supported by the plotter and available in its driver.
Print PDFs with WPS Office

Try Printing the PDF with WPS Office

Open the locally saved PDF in WPS Office and print it to the HP plotter with the custom paper size selected in the printer properties. This provides another application to test; it does not change Acrobat Reader or repair a plotter driver.

  1. 1. Open the PDF: Launch WPS Office and open the locally saved PDF.
  2. 2. Select the plotter: Choose File > Print and select the HP plotter from the printer list.
  3. 3. Set the paper size: Open the printer properties and select the supported custom paper size and orientation. Check the print preview and scaling options.
  4. 4. Print a test: Click Print and check whether the plotter receives the intended paper size.
Test PDF printing to the HP plotter from another applicationSelect a supported custom paper size through the plotter driverOpen and edit compatible Microsoft Office formats, including DOCX, XLSX, and PPTXUse a familiar interface for documents, spreadsheets, and PDFs
microsoft office alternative - wps office

Frequently Asked Questions

Why does my HP plotter receive Letter size when I selected a custom size?

The plotter driver may not have the custom size defined, or its settings may conflict with Acrobat's paper-source selection. In File > Print, open Printer Properties and confirm the custom size, then test the Choose paper source by PDF page size option.

Should I enable Choose paper source by PDF page size?

Try enabling it when the PDF page dimensions match a size supported by the plotter driver. If you need to select a custom size manually in Printer Properties, try disabling it and check the print preview.

What if the custom paper size is missing from the printer properties?

Look for a custom paper-size option in the HP driver's paper settings and create the size if supported. If the option is unavailable, check HP support for the correct driver and your plotter's supported paper dimensions.

How can I tell whether Acrobat or the plotter driver is causing the problem?

Save the PDF locally and print it from another PDF application using the same plotter and custom size. If that also fails, check the plotter queue, driver, network connection, and printer configuration.