Fix Lines in Acrobat PDFs After Flattening and Black-and-White Conversion
Question details
Identify and remove an unwanted line that appears in an image after an Acrobat conversion action.

- Product
- Adobe Acrobat
- Device & OS
- not provided
- Scenario
- An Acrobat action flattens transparency, converts images to black and white, and exports through PostScript.
- Observed behavior
- An unwanted line appears in one image in the processed output.
Choose a sample PDF that reliably shows the line after processing. Check whether the line remains at different zoom levels or in a printout, since some thin lines are display artifacts.
Test Each Acrobat Action Step Separately
Isolate whether flattening, black-and-white conversion, or PostScript export introduces the line.
In Acrobat, open Tools > Action Wizard, select the action, and choose Edit to review its steps. Menu names may vary by version.
Run a copy of the action with only the transparency-flattening step enabled or retained. Save the result under a new name and inspect the affected image.
Use fresh copies of the original PDF to test the black-and-white conversion and PostScript export separately. Save and compare each result with the original.
Return to Action Wizard > Edit and remove or replace the step that first produces the line. Run the revised action on the sample PDF before processing the full batch.

Compare a PDF Workflow Without PostScript Export
Use this comparison if the PostScript step may be responsible for the artifact.
Review Converted PDFs and Office Files in WPS Office
WPS Office is a free, lightweight alternative with a familiar interface for viewing PDFs and working with Office documents. It does not repair Acrobat action artifacts, but it can help you review converted files alongside your other documents.

Frequently Asked Questions
Why does a line appear after transparency flattening?
Flattening can divide artwork into separate regions, which may produce visible seams or display artifacts. Compare the original and flattened PDFs at several zoom levels and check a printout.
How can I tell which Acrobat step caused the line?
Open Tools > Action Wizard and edit a copy of the action. Test flattening, black-and-white conversion, and PostScript export separately, saving each result for comparison.
Should I remove PostScript export from the action?
Try a sample run without it and compare the resulting PDF with the PostScript output. Remove the step from the batch action only if the line disappears and your downstream workflow accepts the PDF.
Can WPS Office fix an Acrobat flattening artifact?
WPS Office can open PDFs for review, but it does not fix the underlying Acrobat action. Isolate and revise the responsible step in Acrobat.




