Fix Printer Feeds Custom Paper Size Without Printing
Question details
The user is trying to print on a custom C5 envelope (160 × 120 mm), but the printer pulls the paper through without printing any content onto it.

- Product
- Printer Driver
- Device & OS
- not provided
- Scenario
- Attempting to print a document on a custom-sized envelope using a specific 160 × 120 mm page setup.
- Observed behavior
- The custom size appears in the word processor's page setup but is missing from the printer's Paper Handling menu. The printer successfully feeds the paper but outputs a blank page.
Verify that your printer has sufficient ink or toner, and ensure the custom-sized paper is properly aligned in the correct manual feed tray with the paper guides snug against the edges.
Check Printer Hardware Specifications and Driver Limits
Determine if your specific printer model officially supports the exact custom dimensions you are trying to print.
Many printers, especially high-end or specialized models, have strict paper size limitations defined by their hardware and drivers. If a custom size like 160 × 120 mm is not natively supported, the printer may pull the paper through without engaging the print heads to prevent ink from spraying onto the internal rollers.
Check the technical specifications section of your printer's manual or visit the manufacturer's official website to review the exact list of supported media sizes.
Open your computer's 'Printers & Scanners' settings, select your printer, and click 'Printing Preferences'. Look under the 'Paper Handling' or 'Paper Size' drop-down to see if your custom size can be manually defined there.
If the custom size can be entered in your document software but disappears in the actual print dialogue, contact the printer manufacturer to confirm if a firmware update is required to enable arbitrary size printing.

Adjust Page Setup to a Supported Standard Size
Use a slightly larger, officially supported paper size in your print settings and adjust document margins to fit your custom envelope.
Easily Manage Custom Paper Sizes with WPS Office
WPS Office offers an intuitive interface for adjusting page layouts and communicating directly with your printer drivers, making it simple to configure custom envelopes and unique paper dimensions accurately before sending them to your printer.
- 1. Open Page Setup: Launch WPS Writer and navigate to the 'Page Layout' tab located on the top ribbon.
- 2. Enter Custom Dimensions: Click the 'Size' button and select 'More Paper Sizes' from the drop-down menu. Enter your precise width and height (e.g., 160 mm and 120 mm) and click 'OK'.
- 3. Print the Document: Press Ctrl+P to open the Print dialogue. Click 'Properties' next to your selected printer to ensure the printer driver recognizes the document's custom dimensions, then click 'Print'.

Frequently Asked Questions
Why does my custom size show in page setup but not in the print settings?
Page setup is controlled by your word processing software, which generally allows any arbitrary size. Print settings, however, are strictly dictated by your printer's driver, which only displays hardware-supported dimensions.
Why did my printer feed the envelope but output a blank page?
When a printer detects a severe mismatch between the document's custom paper size and its supported hardware limits, it often feeds the page straight through without printing to protect its internal components from ink overspray.
Can I update my printer driver to support more paper sizes?
Sometimes. You can check the manufacturer's website for the latest driver or firmware updates. However, physical hardware constraints usually determine the absolute minimum and maximum dimensions a printer can handle.




