Print an Envelope and Letter from Different Trays in Word
Question details
The user wants to print an envelope and letter from different printer trays in Word.

- Product
- Microsoft Word
- Device & OS
- not provided
- Scenario
- An envelope should feed from a bypass tray while the letter uses the standard paper tray.
- Observed behavior
- The desired result is for Word to send the envelope and letter pages to their respective trays.
Load the envelope and letter paper into their intended trays, following the printer's feed instructions. Check that the installed printer driver recognizes both trays and supports the required paper sizes.
Set first-page and other-page trays in Word
Use this method when the envelope is the first page and the letter follows in the same section.
In Word, open the document, select the Layout tab, and click the dialog launcher in the Page Setup group.
Open the Paper tab. Under Paper source, set First page to the envelope or bypass tray and Other pages to the standard letter tray.
Set Apply to as appropriate for the document or section, then click OK.
Select File > Print, confirm the correct printer and paper settings, and click Print.
Assign trays separately for envelope and letter sections
Use section-specific settings when the envelope and letter are in separate sections, such as when they use different paper sizes.
Prepare Letters and Envelopes with WPS Office
WPS Office is a free, lightweight Office alternative with a familiar interface. Open compatible Word documents and continue working with minimal disruption when moving between suites.

Frequently Asked Questions
Where are the tray settings in Word?
Open Layout, click the Page Setup dialog launcher, and select the Paper tab. The First page and Other pages options appear under Paper source.
Why isn't my bypass tray listed?
In File > Print, check that the correct printer is selected. Then check the printer driver and its tray configuration; the driver must recognize and support the tray for Word to offer it.
Can the envelope and letter have different paper sizes?
Yes. Place them in separate sections and use Layout > Page Setup to set the appropriate paper size for each section. Check the tray settings for each section as well.
Why does the first letter page use the envelope tray?
If the letter starts a new section, its first page can use that section's First page tray setting. Click in the letter section and check both paper-source settings on the Page Setup Paper tab.




