Print Word Pages and Sections From Different Paper Trays
Question details
Print selected Word pages on different paper types using separate printer trays.

- Product
- Microsoft Word
- Device & OS
- not provided
- Scenario
- A document contains pages that need to be printed on paper loaded in different printer trays.
- Observed behavior
- The desired result is for each selected page or section to use the tray containing the appropriate paper.
Load the paper types into the appropriate trays and select the intended printer in Word. Check the printer properties to confirm that its driver exposes the trays and that the configured paper sizes match the loaded paper.
Assign paper trays to Word sections
Use section-specific paper source settings when groups of pages consistently need different trays.
The available tray names and paper-source options depend on the printer driver. Section breaks can change pagination, so review the document after inserting them.
Place the cursor where a different paper type should begin, then choose Layout > Breaks > Next Page under Section Breaks. Repeat at each point where the tray needs to change.
Click inside the first section, then open Layout > Page Setup using the dialog launcher and select the Paper tab.
Under Paper source, choose the desired tray for First page and Other pages. Set Apply to to This section, then click OK.
Click inside each remaining section and repeat the Paper tab settings, choosing the tray required for that section.
Open File > Print, review the preview and printer settings, and print a test to verify the tray selection before printing the full document.

Print page ranges as separate tray-specific batches
Use separate print jobs when you prefer not to add section breaks or write a macro.
Print Different Pages From Separate Trays in WPS Writer
Open the document in WPS Writer and print page ranges as separate jobs, selecting the appropriate tray in the printer properties for each batch.
- 1. Open the document: Open WPS Writer and use File > Open to select the Word document.
- 2. Select a page range: Choose File > Print, select the printer, and enter the pages to print in the page range field.
- 3. Select the paper tray: Open the printer's Properties or Preferences from the print dialog and select the tray containing the required paper.
- 4. Print each batch: Click Print, then repeat File > Print for the remaining page ranges, changing the tray for each batch as needed.

Frequently Asked Questions
Can I use different trays without writing a Word macro?
Yes. In Word, assign paper sources to sections through Layout > Page Setup > Paper, or print each page range separately and select its tray in Printer Properties.
Why is my printer tray missing from Word?
Confirm that the correct printer is selected under File > Print, then check Printer Properties or Preferences. The driver must expose the tray before Word can offer it as a paper source.
Can the first page of a section use a different tray?
Yes, if the printer driver supports it. Click in the section, open Layout > Page Setup > Paper, and select different sources for First page and Other pages.
Will separate print jobs preserve duplex page order?
Not necessarily. Each page range starts a separate job, which can change how pages are paired on sheets. Print a small test and check the duplex setting in Printer Properties before printing all batches.




