Fix PDF Artwork Shifting to the Margins When Printing
Question details
The user needs to print Illustrator artwork at its intended position without the PDF shifting toward the margins.

- Product
- Adobe Illustrator and Adobe Acrobat
- Device & OS
- not provided
- Scenario
- Artwork with bleed is exported from Illustrator to PDF and printed through Acrobat on an Epson ET-3760.
- Observed behavior
- The printed artwork appears at an unexpected margin, even when its position and bleed are adjusted in Illustrator. Printing directly from Illustrator produced the intended placement.
Check the intended artwork position relative to the finished trim edge and confirm the PDF page size, bleed, and crop marks. Load the intended paper and check whether the printer driver supports borderless printing for that paper size and type.
Print the artwork directly from Adobe Illustrator
Use Illustrator's print dialog when Acrobat changes the artwork's placement or when precise positioning is essential.
Open the original file in Illustrator. Check the artboard dimensions and use the Transform panel to verify the artwork's X position.
Choose File > Print, select the Epson ET-3760, and set the paper size and orientation to match the loaded paper.
Review the print preview and scaling options in the Print dialog. Use actual size or 100% scaling where available, and check how the artboard is positioned on the sheet.
Open the printer setup or properties from the Print dialog. Select the loaded paper type and an available high-quality setting in the Epson driver; the available options depend on the selected media.
Print a test page and measure the artwork's position from the intended trim edge. If it differs, recheck the artboard, print placement, and printer settings before changing the artwork.

Check PDF scaling and printer margins in Acrobat
Use this method when you need to print the exported PDF rather than the original Illustrator file.
Print and check your artwork PDF in WPS Office
Open the exported PDF in WPS Office and use the print preview to check paper size and scaling. Review the printer driver's margin and borderless settings, then measure a test print before relying on precise placement.
- 1. Open the PDF: Launch WPS Office and use Open to select the exported artwork PDF.
- 2. Review the print preview: Choose File > Print, select your printer, and check the paper size, orientation, and preview.
- 3. Check scale and printer settings: Choose actual size or 100% scaling if available, then open printer properties to review paper type and any supported borderless option.
- 4. Print a test: Select Print and measure the result against the intended trim edge. If placement is critical and still differs, try printing the original file from Illustrator.

Frequently Asked Questions
Why does my PDF print at a different margin than the Illustrator artwork?
Fit-to-page scaling, PDF page dimensions, bleed, driver positioning, or the printer's non-printable area can change the result. Check File > Print in Acrobat and compare its preview with the Illustrator artboard.
Should I choose Actual Size or borderless printing?
Choose Actual Size in Acrobat when you need to avoid fit-to-page scaling. Use a borderless option in printer properties only when supported for the selected paper; test it because borderless printing may enlarge or crop the output.
Does bleed change where I should measure the artwork?
Yes. Bleed extends beyond the finished trim edge, so measuring from the outer PDF page or paper edge may give a different result. Check the trim size and crop marks before measuring the printed position.
How can I select higher print quality from Illustrator?
In File > Print, open the printer setup or properties and choose the correct paper type and an available higher-quality setting in the Epson driver. Quality choices can vary with the selected media and driver.




