Set PDF Scale and Resolution for a Large Billboard
Question details
Determine an appropriate artwork scale and PDF export resolution for an 8 × 4 foot billboard.

- Product
- PDF export
- Device & OS
- not provided
- Scenario
- Preparing billboard artwork containing text, patterns, and photographs for a sign printer.
- Observed behavior
- The exported PDF is too large for the sign printer to open.
Ask the printer for its preferred PDF specifications, maximum file size, bleed, and whether it accepts scaled artwork. Confirm that the final print size is 96 × 48 inches.
Export the billboard at quarter scale and 300 dpi
Use quarter-scale artwork to create a manageable PDF while retaining a typical effective resolution for a large billboard.
At quarter scale, the artwork measures 24 × 12 inches. When enlarged to the final size by 400%, images exported at 300 dpi have an effective resolution of 75 dpi, which is generally suitable for billboard viewing distances.
Dpi settings mainly affect raster images; keep text and patterns as vectors where possible. Reducing scale alone does not necessarily reduce the file size unless image sampling or compression is also adjusted.
In the source design application, use its page or document size settings to create a 24 × 12 inch page, excluding any bleed required by the printer.
Add or resize the text, patterns, and photographs to fit the quarter-scale page. Keep text and patterns as vector objects where possible.
Choose the application’s Export or Save as PDF command. If its PDF settings offer image downsampling, set raster images to 300 dpi at the quarter-scale page size.
Open the exported PDF, check its dimensions and file size, and tell the printer that it must be enlarged to 400% for a 96 × 48 inch billboard.

Export existing full-size artwork at approximately 75 dpi
Use this approach when the billboard is already designed at its final 96 × 48 inch size.
Prepare a quarter-scale billboard PDF in WPS Presentation
Use a custom-size slide to arrange billboard artwork at quarter scale, then export it as a PDF. Prepare photographs at the needed resolution before inserting them if your WPS version does not offer PDF image downsampling controls.
- 1. Create a custom slide: Open WPS Presentation, create a blank presentation, and use the slide size or page setup controls to set the slide to 24 × 12 inches.
- 2. Add the artwork: Use Insert to add text, shapes, and photographs. For a full-slide photograph, prepare an image of approximately 7,200 × 3,600 pixels to provide 300 pixels per inch at quarter scale.
- 3. Export to PDF: Choose Export to PDF from the menu and save the slide. If image quality or downsampling options are available, select settings that retain the required resolution.
- 4. Check the result: Open the PDF to check its dimensions, appearance, and file size. Tell the printer to enlarge it by 400%, and confirm that the PDF meets its specifications.

Frequently Asked Questions
Why does 300 dpi at quarter scale become 75 dpi on the billboard?
Enlarging the artwork to 400% spreads the same image pixels over four times the width and height. Dividing 300 by 4 gives an effective resolution of 75 dpi at the final print size.
What size should an 8 × 4 foot billboard be at quarter scale?
Set the artwork page to 24 × 12 inches, excluding any bleed. Tell the printer that the final output should be enlarged to 96 × 48 inches.
Will lowering the PDF image resolution affect text?
Image downsampling normally affects raster images, not vector text. Keep text and patterns as vectors when exporting, and check the PDF before sending it to the printer.
What if the exported PDF is still too large?
Check the printer’s maximum file size and use the PDF export settings to adjust image compression or downsampling. Ask the printer which settings are acceptable before reducing quality further.




